Indian Army
| Punjab | Gurdaspur |
- Download
Time left to bid
4
Days20
Hours37
MinutesTender Roadmap
Publish Date
22 Jul 2025
Tender is published for seller Participation.
Bid Submission End Date
01 Aug 2025
Last day to participate Tender on Gem platform.
Evaluation Date
01 Aug 2025
Technical committe will evaluate Bid and Open Results.
| Earnest Amount | |||||||||||||||||||||||||||||
| 37.5 K | |||||||||||||||||||||||||||||
| Tender Amount | |||||||||||||||||||||||||||||
| Refer Doc | |||||||||||||||||||||||||||||
| Department | |||||||||||||||||||||||||||||
| Department Of Military Affairs | |||||||||||||||||||||||||||||
| Item Category | |||||||||||||||||||||||||||||
| 40 MM into 40 MM Y Type pipe structure of 7 feet with 1 feet 40 MM into 5 mm Angle with installation 8 feet 40 mm into 5mm angle for horizontal support with installation Center stand spring 3 mm with installation Hinges of 50 mm thickness with 12 mm hole with bolts 6 inch horizontal round plain bar fixed in mesh with installation Steel wire of 10 mm into 10 feet with installation stallion winch with smooth pulling features with installation Steel U clamp 1 feet into 1 feet U structure of 40mm into 5 mm angle frame for hinge with installation 50 mm into 50 mm galvanized interlocked mesh of 9 feet into 7 feet with installation Nut bolts 12 mm into 50 mm Abrasive cutting wheels 4 inch 10 Nos welding rod Paint | |||||||||||||||||||||||||||||
| Purchaser Address | |||||||||||||||||||||||||||||
| Gurdaspur | |||||||||||||||||||||||||||||
| Work Description | |||||||||||||||||||||||||||||
|
Design and Fabrication of Cope Cage;3026;40 MM into 40 MM Y Type pipe structure of 7 feet with 1 feet 40 MM into 5 mm Angle with installation 8 feet 40 mm into 5mm angle for horizontal support with installation Center stand spring 3 mm with installation Hinges of 50 mm thickness with 12 mm hole with bolts 6 inch horizontal round plain bar fixed in mesh with installation Steel wire of 10 mm into 10 feet with installation stallion winch with smooth pulling features with installation Steel U clamp 1 feet into 1 feet U structure of 40mm into 5 mm angle frame for hinge with installation 50 mm into 50 mm galvanized interlocked mesh of 9 feet into 7 feet with installation Nut bolts 12 mm into 50 mm Abrasive cutting wheels 4 inch 10 Nos welding rod Paint
|
|||||||||||||||||||||||||||||
| Eligibility | |||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||
| My Evaluation Notes | |||||||||||||||||||||||||||||
|
|